- Login
- |
- |
Freestanding Refrigerator 24" x 23-7 / 8" x 78"
Product Code: REF18C
Refrigeration:
- Self contained Cassette® forced-air refrigeration employs R290 hydrocarbon Natural Refrigerant within a sealed capillary tube system.
- Cassette® refrigeration is bottom-mounted and removable from the front for ease of maintenance. Refrigeration may be exchanged or upgraded without mechanic. Designed to hold 36°F to 46°F (2.2°C - 7.7°C).
- Equipped with Energy Efficient Digital Controller featuring visual/audible product protection alarm.
- Priority, directed air flow provides optimum cooling and energy efficiency within cabinet and exclusively at front of unit for optimized heat exchange ventilation.
- Finless, Free&Clear™ Condenser Coil maximizes air-flow over the compressor, reduces energy consumption and is non-clogging.
- Automatic, stainless steel condensate control system.
- Technologically advanced ProducTemp™ provides exterior product temperature display. Displays to a resolution of 0.1°.
- Quality, self-lubricating and sealed motors with streamlined air-flow provide quieter yet robust refrigeration.
Cabinet:
- Exterior – durable appliance white.
- Interior – NSF approved white aluminum liner with stainless steel floor.
- Ergonomic raised interior floor.
- Space Saving Design – air ventilation exclusively from the front of unit
- Insulation – cabinet is foamed-in-place with eco-conscious, polyurethane insulation.
- Heavy duty thread-in leveler legs
Doors:
- Self Closing Swing Doors feature hold-open position, spring back protection and are reversible on-location.
- Magnetic gaskets are single piece bead-mount construction easily removable for cleaning.
- Heat Reflecting HABCO Insulated Safety Glass with black extruded frame.
- Integrated, injection molded pocket handle(s).
Lighting:
- Energy Efficient LED Lighting System for sparkling Illuminated Interior Display, on Switch.
Storage:
- Seven (7) white coated shelves 19 1/2"W x 18"D (496mm x 458mm), are NSF approved.
- Heavy duty aluminum shelving pilasters will not peel or chip adjustment of 1 /2" (13mm) increments.
Electrical:
- Factory power cord installed for connection to a sole-use (dedicated) 115V/60Hz/1-Phase, 15 Amp circuit.
SETTING UP A TIGHTER DIFFERENTIAL ON CAREL CONTROL INSTRUCTIONS (FOLLOW THE INSTRUCTIONSTO SET UP FOR CELSIUS). FOR THIS PURPOSE SET THE CONTROL TO ‘4’ .
1. To change control from deg F to deg C, please hold the ‘wrench key’until ‘P5’ is visible.
2. When ‘P5’ is visible, cycle through the parameters using the ‘up & down’ buttons until the parameter‘EZY’ is found.
3. When it is found, press the wrench key and then change the number using the ‘up & down’ from ‘0’to ‘2’. Note: One can change this setting to ‘4’ instead of ‘2’. ‘4’ gives a tighterdifferential in CELSIUS.
4. Hold the Wrench key until the control shows the current temperature value (should be showing indeg C). The controller is now in deg C.
5. To go back from deg C to deg F, repeat the process, except instead of going from the ‘EZY’ parameter‘2’ back to ‘0’, go from ‘2’, back to ‘1’. The controller is now in deg F. If the process requires a changeback to deg C, repeat the process changing the ‘EZY’ parameter from ‘1’, back to ‘2’.